ChangeLog - 2012
Fri, 28 Dec 2012• Included details about HKS ECU LEDs and how to decode error codes from LED flashing.
Thu, 13 Dec 2012• Included ignition dwell definitions (2JZ-GTE and VQ35DE(T)) from HKS Petr. Thanks!
Wed, 5 Dec 2012• Included photo of GCC and WBo2 (eg: Innovate LC-1) connection.
Fri, 30 Nov 2012• Created list of ignition dwell times for each engine. If your engine is not listed, please request it.
Wed, 28 Nov 2012• Created list of injectors dead time (lag), both stock and aftermarket.
Wed, 7 Nov 2012• No more Type B ECU! differences now unified into Type A from serial number FCP035001 onwards.
Sat, 27 Oct 2012• Added real example screenshots of bad ignition tunes, as done by authorised tuners.
Wed, 19 Sep 2012• Contact form problem now resolved.
Sat, 8 Sep 2012• Photo of custom Toyota 1JZ-GTE harness.
• More photos and description updated for HKS EIDS.
• Even more photos of HKS OSC, including PCB and both harnesses.
• For sale page updated with quite a few more items.
Mon, 3 Sep 2012• Finally confirmed OSC wiring diagram with official harness. Thanks to Tony from Thailand for supplying OSC hardware.
Thu, 30 Aug 2012• Added oldschool GCC manual.
Sun, 12 Aug 2012• Added equations for GM 749 (3 bar) and Defi guage (3 bar) MAP sensors. Also updated ebay 4 bar equation.
Fri, 3 Aug 2012• More photos of mixture controller, including PCB, resistor specs and expected TTL voltage.
Sat, 14 Jul 2012• Added information and photo of custom-made harness for the Nissan R33 RB25DET.
• Thanks to Chris for advising that "Speed Input - ON" should NEVER be enabled for ignition cut / launch control. It's enabled by the pull-up resistor option!
Thu, 12 Jul 2012• More harnesses for sale!
Fri, 22 Jun 2012• Added information points on tuning.
• Added small list of lacking features and potential bugs of HKS ECU.
• Updated jumper / settings list for Nissan: CZ32 (VG30DETT), NM35 (VG25DET), WGNC34 (RB25DET), A31 (RB20DET)
• Updated jumper / settings list for Mitsubishi: CZ4A (4B11), CT9A (4G63)
• Updated jumper / settings list for Mazda: NB6C (B6-ZE)
• Updated jumper / settings list for Subaru: BP5 and BL5 (EJ20X, EJ20Y), BE5 (EJ206, EJ208), BD5 (EJ20H, EJ20R), GDB (EJ207)
Sun, 10 Jun 2012• Added Forsale page, for parts that I do not need any more.
Tue, 15 May 2012• Updated Knock Defender information on AFK page.
Wed, 11 Apr 2012• Added example PFC F-CON wiring diagram (TP22, JZZ30). Thanks Nick!
• Re-added serial cable diagram information.
Sat, 17 Mar 2012• Knock hardware device pre-released!
Thu, 16 Feb 2012• added Mitsubishi 8,9,X MAP sensor specifications and equation.
Wed, 8 Feb 2012• Added photos / videos of "HKS Flash Editor".
• Added photos of new redesigned F-CON V Pro ECU.
Wed, 25 Jan 2012• Added photos of EVC 1-6, so identification can be made.
• Added basic VALCON page, with VCAM system information (discontinued).
• Added specs of oxygen sensor used by AFK v1 and v2. Thanks Peter!
Mon, 23 Jan 2012• Added photos of AFK v2. Thanks Jan
• Added information about OSC. Thanks Peter
Thu, 19 Jan 2012• Added ECU comparison chart to hardware page.
• Added currently sold and supported ECU information, including part numbers, to hardware page.
Sat, 14 Jan 2012• Moved "version information" from Hardware to F-CON V Gold page.
• Cleaned up "software identification" page since it was vague what works for FConFiler.
• Added information about "yellow dot" sticker.
Sun, 1 Jan 2012• Added internal jumper settings / inside switch settings for all engines / vehicles in simplified table format.
• Added photos of R35 spec F-CON V Pro Gold, and Valcon.